The Basics of Sump Pump Maintenance
Sump pumps can prevent water from flooding the basement or crawlspace of a home in Salmon Creek, WA. These pumps must be regularly cleaned and maintained in order to function properly. Learn the basic principles of keeping the sump pump in your home working and ways to ensure that it will operate in an emergency situation without electricity.
Keep the Pump Clean and Functional
Dirt, gravel, and other types of debris may cause blockages that force a pump to work harder to do the same amount of work. Pump maintenance involves regularly cleaning out the
- Bottom grate
- Discharge pipe
- Intake screen
- Vent hole
You should also check the operation of the float mechanism. Buildup or malfunctions may result in damage to the pump or an eventual overflow.
Check Power Sources and Alarms
A sump pump should plug into a ground fault circuit interrupter or GFCI outlet. Make sure that
- The outlet is functional
- The power cord is in good condition
- The backup battery is replaced every two to three years
Some pumps have battery-powered water level alarms. If your model features emergency notifications, you should
- Turn on alerts
- Know what alerts mean
- Be able to receive alerts
Newer models may send alerts to a cell phone so that you will receive water level warnings no matter where you are.
Consider Backup Solutions
If the pump in your home does not have a back-up battery, you can rely on an alternative power source such as a
- Car battery
- Deep cycle boat battery
You may also want to consider a back-up water-powered pump that is capable of working without a power source.
Cleaning and maintaining a sump pump can prevent flooding in a basement or crawlspace of your home in Salmon Creek, WA. If a pump and backups fail and water levels start to rise, rely on a residential damage mitigation service.